We install control cabinets all over the world.

At Delinte, we have been manufacturing traffic regulators for SpainThe company’s products are also used in Europe, the Middle East and Latin America. As a base material we use galvanized steel or stainless steel that offer adequate resistance to atmospheric agents and also to possible acts of vandalism. In any case, we ensure that all our access control cabinets are made of materials that have passed the most rigorous tests for resistance to water, dust and especially the corrosive maritime environment.

At Delinte we always add top quality raw materials to the experience and to the experience and know-how of our team, so that our control cabinets stand the test of time very well.

In addition, we also manufacture auxiliary equipment for tunnels, toll parking, road signaling, etc.

Tailored to the needs of our customers

Obviously the function of the control cabinets is to protect the equipment containing the protect the equipment they contain. Electronically controlled access provides users with great flexibility. All the compartments of our cabinets are specially designed to house and protect the different electronic systems, but they can also be adapted according to the needs and requirements of our customers.

The cabinets for the control of gauging control are becoming very important in the times we live in. The pandemic caused by Covid-19 means that access to different locations and venues must be more tightly controlled. Having automatic control mechanisms is a great advantage.

The access control systems can be located in communities of neighbors, in garages, in companies or in other types of spaces that need to manage who enters and who does not. These control systems are designed to function in such a way that the technology they house can provide sophisticated security solutions. Our access control cabinets have to be effective for to allow the installation of control software, which ultimatelyThe software is ultimately responsible for allowing or disallowing people to enter the protected areas.

The access control system must allow the identification of the user. user identification through different types of methods. These can be personal cards, secret codes, biometric recognition, etc. But they can also provide other types of solutions such as time control, capacity control, localization, etcetera.

In each of the accesses or doors, one of our access cabinets will be installed in which the readers will be placed, which are the ones that check if the userss have access permits to the protected zone or area. These accesses can be by proximity, for example, using identification cards, by radio frequency through a remote control, or even by Bluetooth, which allows cell phones to be configured as identification devices. A more sophisticated solution, which is also used, is the biometric fingerprint.

On the other hand, access control systems can be stand-alone, i.e. there is only one basic control that gives access to the door. Or they can be centralized, whereby several readers are placed and have to communicate with each other.

La entrada Control cabinets: traffic, gauging and access control. se publicó primero en Mecanizados DELINTE.

What is GRP and what is it used for?

GRP(Glass Reinforced Plastic) is a composite material, consisting of a plastic or resin matrix reinforced with glass fibers. It is a light, rigid and resistant material that offers a good response to corrosion and wear. It is also useful as an insulator, either acoustic or electrical. The truth is that its properties vary depending on the amount of fiber it contains.

Among other uses, it is used in the automotive and aeronautical industries, as well as in structural elements of construction and in water tanks.

The use of steel

Steel is an alloy of iron and carbon. The latter preserves the metallic characteristics of iron but improves its physical and chemical properties. To be considered steel, the alloy of iron and carbon must be less than 1.7%. It is a hard yet elastic material that is malleable to create different types of products.

Steel as a material has very good mechanical properties as it is very strong and also inexpensive. On the other hand, it is also possible to alloy steel with other materials such as chromium, magnesium, tungsten, zinc, etc. to improve its properties.

Stainless steel is an excellent material for its resistance to corrosion and oxidation, mainly due to the presence of chromium, which allows the formation of a thin film that is impermeable and resistant to corrosives. In addition, stainless steel is easy to clean, which makes it hygienic. It has a very low maintenance cost, resists well to both high temperatures and temperature variation and is a recyclable material, thus contributing to the care of the planet.

At Delinte we manufacture the products you need

In Delinte we have manufactured since our beginnings in the 80’s, in addition to access control or metallic cabinets, all kinds of metallic steel constructions. Our philosophy is that, after all, almost anything can be created. Our products include protective fences for sidewalks that are highly resistant to corrosion caused by inclement weather, advertising billboards, metal walkways and enclosures for different uses. If you have an idea or need a specific product that you want to be made of steel, Delinte will make it happen.

If you wish to contact us you can do so by calling us at 916 77 03 64 or by filling out the form on our website so that we can contact you. One of our professionals will clarify your doubts and, if you wish, we will provide you with a customized quotation.

La entrada The advantages of steel versus GRP fabrication se publicó primero en Mecanizados DELINTE.